Wall Exhaust Fans

Why Wall Exhaust Fans Suit Apartments with No Roof Space

In many Melbourne apartments there’s little or no roof cavity. A wall exhaust fan vents straight outdoors, keeping the air path short so you get powerful, real-world extraction that clears steam and odours fast. A qualified electrician can usually upgrade an older fan using the same wall opening and improve performance immediately.

When a Wall Fan Is the Right Call

• No roof space / limited access. Perfect for apartments and solid ceilings.

• Shortest path = strongest performance. Minimal duct = less resistance.

• Straightforward install. No roof penetrations; your electrician works through the wall.

When a Ceiling/Ducted Fan May Be Better

• You want the outlet centred in the room.

• You’d rather hide the fan body in the ceiling.

• You want a remote inline unit for ultra-low room noise.

Signs You Need an Electrician to Repair or Replace

• New rattles, grinding or intermittent operation

• Weak extraction - steam lingers, mirrors fog, mould

• Back-drafts or cold air in winter

• Brittle, cracked grilles or discoloured cabling

• Fan won’t run or the switch/timer has failed

Recommended Upgrades (What Works Best Now)

1. High-Performance EC/DC Motors
   Modern motors deliver strong airflow with lower energy use.

2. Back-Draught Control
   Integrated shutters or quality dampers stop winter chills.

3. Weatherproof External Grilles
   Durable hoods/louvres that look neat and keep out rain and pests.

4. Smart Controls Fitted by Your Electrician

   • Run-on timer (10-20 mins after lights off)

   • Humidity sensor to auto-start when moisture rises

   • Isolation switch for safe servicing

5. Correct Sizing = Powerful Results
   Common sizes are 150 mm and 200 mm. Your electrician will size airflow to the room for proper air-changes per hour.

Our Electrician Install & Replacement Process

1. Assessment - Measure the room, check wall construction, wiring and the external grille.

2. Product Match - Recommend a powerful model with back-draught control and the right timer/humidity options.

3. Core Drill or Re-use Opening - Clean penetration to suit 150–200 mm fans if no hole exists.

4. Electrical & Compliance - Wired to AS/NZS 3000, with suitable IP ratings for bathroom zones.

5. Seal & Finish - Neat internal fascia, weatherproof external grille, sealed penetrations.

6. Handover - Set timers/humidity thresholds and provide warranty details.

FAQs

Will a wall fan feel powerful enough for showers?
Yes. The short, direct path outdoors gives strong extraction when the fan is correctly sized and installed by an electrician.

Can you stop winter draughts?
We specify back-draught shutters and quality external grilles to block cold air.

Which rooms suit wall fans?
Bathrooms, ensuites, toilets, laundries and compact kitchens - especially in apartments with no roof space.

What maintenance is needed?
Wipe the internal grille, vacuum dust from the intake, and check the external grille seasonally.

Safety & Standards (Australia)

• Installed by a licensed electrician

• Compliant with AS/NZS 3000 and NCC guidance on condensation/ventilation

• Correct IP ratings for bathroom zones

Ready for a Powerful Upgrade?

Book a Melbourne electrician to replace or install your wall exhaust fan. We’ll size it for powerful extraction and finish everything neatly inside and out.
Call: (03) 9428 6770 • Book online