Total: $0.00
Taxes and shipping calculated at checkout
EV CHARGER INSTALLATION
EV charger installation in Melbourne
Blunt’s Electrical installs EV chargers across Melbourne and inner suburbs - dedicated circuits, correct protection, and compliant testing. Clear communication, tidy workmanship, and jobs done properly.
Prefer a quick quote? Send a photo of your switchboard and where you want the charger installed.
Service areas: Richmond, Burnley, Kew, Hawthorn, Abbotsford, South Yarra, Cremorne, Fitzroy, Collingwood, Prahran, Toorak + nearby.
About our EV charger installation
Want fast, safe EV charging at home? Most EV charger installs involve running a dedicated circuit from your switchboard to the charger location (garage, carport or outdoors), then fitting the correct protection and completing compliant testing.
We’ll confirm your supply and capacity (single-phase or three-phase), check your switchboard, and install the circuit with correct cable sizing and safe routing. If anything needs upgrading or isn’t compliant, we’ll explain options clearly before any extra work.
Popular EV charger brands we install
We install EV chargers for Tesla and all major brands. If you’re not sure what you have, send a photo of the charger (or link) and your switchboard — we’ll confirm compatibility and quote.
Tesla Wall Connector installation
If you’re searching for a Tesla charger installation, we install Tesla Wall Connectors (including Gen 3) with a dedicated circuit, correct protection, and compliant testing. We’ll confirm your supply (single-phase or three-phase), cable path, and the best mounting location (garage, carport, or outdoors).
- Switchboard and capacity check - confirm spare capacity and protection requirements
- Dedicated circuit - correct cable sizing and safe routing to the charger location
- Outdoor installs - suitable weatherproofing and tidy finish where required
- Commissioning support - basic setup guidance after install so you can start charging
Zappi EV charger installation
Zappi is a popular choice for homes with solar (or planning solar). We install Zappi chargers with a safe, compliant dedicated circuit and help you choose the most practical mounting location and cable route for your property.
- Site check - confirm switchboard capacity and best cable path
- Correct protection - dedicated circuit protection and compliant testing
- Indoor or outdoor installs - safe routing and suitable hardware for long-term use
We install all major EV charger brands
Tesla, Zappi, BYD, Wallbox, EVnex and other common Type 2 chargers — if you’ve already purchased a unit (or want help choosing), we can install it and make sure the circuit, protection, and testing are done properly.
To quote accurately, we’ll usually ask for a photo of your switchboard, where you want the charger mounted, and the approximate distance between them.
EV charging options we install
Home EV charger installation
Garage, carport, and outdoor locations
Dedicated charging circuits
Correct cable sizing + protection
Single-phase + three-phase chargers
Tesla, Type 2 and common brands
Switchboard upgrades if required
Capacity checks + safety compliance
Why choose Blunt’s Electrical?
- Licensed and insured electricians - safe work completed to Australian standards.
- Upfront advice and options - clear recommendations, no vague surprises.
- Compliance-focused - correct protection, testing and certification where required.
- Clean, respectful workmanship - tidy installs in homes and small businesses.
- Local and responsive - inner Melbourne team, quick turnarounds where possible.
How EV charger installation works
- Confirm your supply - single-phase vs three-phase, available capacity
- Switchboard check - protection devices and condition
- Install the circuit - correct cable sizing and safe routing
- Mount and commission - set up charger and verify operation
- Test and certify - compliance testing and documentation where required
How much does EV charger installation cost?
Cost depends on the distance from your switchboard to the charger location, access (roof space, underfloor, brick walls), and whether your switchboard needs an upgrade. We can often quote from photos, or organise a quick site visit if needed.
- Short cable run (switchboard near garage) - usually simpler
- Long cable run / difficult access - more involved
- Switchboard upgrade - may be recommended depending on capacity and protection
Related electrical services
If needed, we can also help with switchboard upgrades, electrical safety checks, and fault finding and repairs.
Quick FAQs
Can you install a Tesla charger?
Yes - we install Tesla Wall Connectors and other Type 2 chargers. We’ll confirm the right circuit and protection for your setup.
Do you install Zappi chargers?
Yes - we install Zappi EV chargers and will advise on a safe, practical setup for your home, including cable routing and correct protection.
Do I need three-phase power?
Not necessarily. Many homes charge perfectly well on single-phase (commonly up to 7kW). If you have three-phase, faster charging may be possible depending on the charger and supply capacity.
Do you install chargers outdoors?
Yes - we’ll confirm the charger is suitable for the location and install the circuit safely for long-term use.
Ready to book EV charger installation in Melbourne?
Tell us what you need and we’ll get back to you with next steps. If it’s urgent, call 03 9428 6770.
Don’t worry, it's obligation free! Tell us how we can help and we’ll get back to you shortly.